How to set up a wireless network using Powerline Wi-Fi Kit by Pair button

User’s Application Scenario:

I have a wireless router in my house, but the wireless signal cannot reach every corner. So I bought a Powerline Wi- Fi Kit to extend the wireless network. The Powerline Wi-Fi Kit includes a powerline adapter and a powerline extender.How can I do that? Follow the steps below. Note: powerline adapter WD-T1202MH+WD-F1202MH-T is used for demonstration in this article.

Step 1

Connect the powerline adapter to an available LAN port of the host router. Plug the powerline adapter into a wall socket. Plug the powerline extender into a wall socket near the adapter.

3

Step 2

Pair the powerline devices. a. Press the Pair button of the powerline adapter for 1-3 second. The Power LED starts blinking. Note: If the Power LED does not blink, press it again. b. Within two minutes, press the Pair button of the powerline extender for 1-3 second. The Power LED starts blinking. When the Powerline LED stays on, the pairing process is done!

2

Step 3

Find the Wi-Fi Info in the back sticker, and then relocate the powerline extender to a new location. Connect to the Wi-Fi using the SSID and password on the card

Media Contact
Company Name: Wondertek
Email: Send Email
Country: China
Website: https://www.kswondertek.com/