Lubrication And Dust Proof Of Linear Guides

Supplying insuffcient lubrication to the linear guides will greatly reduce the service life due to an increase in rolling friction. The lubricant provides the following functions;Reduces the rolling friction between the contact surfaces to avoid abrasion andsurface burning of the linear guides; Generates a lubricant fflm between the rolling surfaces and decreases fatique; Anti-corrosion.

1.Grease Linear guides must be lubricated with the lithium soap based grease before installation. After the linear guides is installed, we recommend that the guides be re-lubricated every 100 km. it is possible to carry out the lubrication through the grease nipple. Generally, grease is applied for speeds that do not exceed 60 m/min faster speeds will require high-viscosity oil as a lubricant.

maintainance

2.Oil The recommended viscosity of oil is about 30~150cSt. The standard grease nipple may be replaced by an oil piping joint for oil lubrication. Since oil evaporates quicker than grease, the recommended oil feed rate is approximate 0.3cm³/hr.

maintainance1

3. Dust Proof Dustproot: Generally, the standard type is used in a working environment with no special requirement. lf there isa special dustproof requirement, please add the code (ZZ or ZS) after the product model.

Media Contact
Company Name: Zhejiang Pengyin Technology & Development Co., LTD.
Email: Send Email
Phone: +86 19957316660
Address:No.8 Sangdelan Road Wuyuan Street Haiyan County
City: Jiaxing
State: Zhejiang
Country: China
Website: https://www.pyglinear.com/