Basic Information and Features Hl-400 Battery Powered Crimping Tool

Features

1. 360° rotating clamp head,which is suitable for various operations

2. OLED real-time display of various information

3. One key control,the operation is simple and convenient, one complete the operation

4. One key reset, when there is an error in the crimping process, people can easily reset by pressing the trigger

5. Battery upgrade to 4.0AH.Two batteries can work in turn

 

Specification
 
Max. crimping force: 120KN
Crimping range: 10-300 mm2
Stroke: 17mm
Hydraulic oil: Shell Tellus T15#
Ambient temperature: -10 – 40℃
Battery: 18v 4.0Ah Li-Ion
Crimping cycle: 42mm(depending on the  size)
Crimp/charger: Approx. 260 crimps (Cu150 mm2)
Charging voltage: AC 100V〜240V; 50〜60Hz
Charging time: Approx. 1.5 hours
OLED display: display voltage, temperature, crimping times, errors information
Accessories:
Crimping die (mm2): 10.16.25.35.50.70.95.120.150.185.240.300
Weight(incl. battery): Approx. 6.86kg

Gross weight:

Approx.16kg

Carton size:

540x430x170mm

Package:

One pc/Aluminum alloy case/Cardboard box
Battery: 2 pcs
Charger: 1 pcs
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
 
Description of Components
 
 
HL-400-Battery-Powered-Crimping-Tool-description-5

Parts No.

Description

Function

1

Pin For locking/unlocking the upper die

2

Die For crimping, interchangeable die

3

Retaining clips For locking/unlocking the down die

4

Limited screw For prevent head from dropping or popping

5

LED indicator For indicating the operating condition and battery discharging situation

6

A white Led light To illuminate the working area

7

Trigger For starting operation

8

Retract button For manual retracting the piston in case of an incorrect operation

8

Trigger For starting operation

9

Battery lock For locking/unlocking the battery

10

Battery For supplying power, rechargeable Li-ion(18V)
Function Description
 
 
1. image9 MCU – automatically detect the pressure during operation and provide security protect, shut off the motor and reset automatically after operation.
 
2. image10 Auto reset – release the pressure automatically, retract the piston to the starting position when reached the max output.
 
3. image11 Manual reset – can retract the position to the starting positioning in case of an incorrect crimp
 
4. image12 The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
 
5. image13 The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
 
6. image14 image15 One significant sound will be heard and a red display flashes if any error occurs.A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after releasing the trigger.
 
7. image16 The whole tool is controlled by one trigger. This results in any easy handing and a better grip compared to a two button operation.
 
8. news-17 Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to Ni-MH batteries.
 
9. image18 A Temperature sensor makes the tool stop working automatically when the temperature over 60°C under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

Media Contact
Company Name: Wenzhou HEWLEE Tools Co., Ltd.
Email: Send Email
Phone: +86 13758839302 (WhatsApp)
Country: China
Website: https://www.batterycrimpingtools.com/